The MSP-647 and -887 are very high volume systems with typical throughput rates of 1,000-5,000 parts per hour; actual rates will vary with squeegee speed, stroke length, and parts handling rates among other factors.  Both machines use AMI's patented Torsion Bar squeegee head for precise thickness control and print definition, coupling the MSP-645 print head (in the MSP-647) or the MSP-885 print head (in the MSP-887) with a mechanically indexed 8-station rotary table for unparalled performance.  A variety of automatic load/unload options are available involving parts transfer and  loading and unloading of stack or partitioned magazine type cassettes. 

Recommended for: High volume, high accuracy screen printing over a maximum 2" x 2" (51mm x 51mm) area for the MSP-647, or a maximum 5" x 5" (127mm x 127mm) area for the MSP-887.

MSP-647, -887 Technical Specifications

Maximum Print Capabilities

Standard Equipment

Print head: Mark III Torsion Bar squeegee head
Squeegee drive: Hydraulic, recirculating with 3gpm (11.3L/m) pump
Substrate transport: High-speed, 8-position rotary index table
Screen/Substrate alignment method: Manual screen position
Screen frame attachment: Bolt-on
Substrate alignment method: Independent micrometers for X, Y; independent true Ø adjustment with dial indicator readout
Workholder position repeatability: 0.002" (0.05mm) TIR at tool center
Stage lock: n/a
Operator interface: Color touchscreen
Control system: Industrial PLC
Services required: Electrical, CDA (Clean Dry Air)
Configuration: Includes automatic substrate ejection onto queuing belt

Physical Dimensions

Key Options Available